Vinyl Resin for hot stamping foil adhesive

Very good adhesion force for aluminum foil layer and hot stamping substrate. The adhesive layer can fusion as  hot melt adhesive when hot stamping temperature up to 120-150℃.

Hot stamping foil is made by coatings and vacuum evaporation on film base with another metal foil layer

 It is white powder, ketone soluble with colorless, transparent solution, and because of the carboxyl functional group,it  has excellent adhesion on  metal,especially on aluminum foil,the resin foil also  has a good adhesion on PVC,ABS,paper,textiles,beton,etc.At the same time, it   also has good water resistance,   excellent oil, ester, acid, alkali and salt   water solution resistance.

Vinyl Resin Quality standard (XHQB-6)

Carboxyl-Modified Vinyl Chloride/Vinyl Acetate Terpolymer is used primarily for air-dry finishes, such   as maintenance, marine and metal coatings, aluminum foil varnish,cans sealed  paint,shoe   adhesive,floor paint,cement paint,silk screen printing and transfer  ink. And it often mixes with LC-40 grade, which is used in the production of   heat sealing packaging coatings, can effectively reduce the heat sealing temperature, raise the heat sealing strength. It also can be used to produce the VC sealing plastic package, Electro-chemical aluminum paint, thermal   transfer adhesive.

Package, storage and transportation:

* In kraft bag, lined with pp bags of 25kgs net, with PE inner bag.

* Store in a dry and ventilated place, do not place in open-air, avoid storage in  direct sunlight and caution against wet.

*  Must be transported in clean vehicle with awning and keep away from moisture.

* It is NOT hazardous  article, and the shelf life is one year from the production date.